The Wild Bunch Forum Archive
The Wild Bunch Forum Archive
Home | Profile | Active Topics | Members | Search | FAQ
Username:
 Password:
Save Password
Forgot your Password?

 All Forums
 Technical & Reference
 Technical Questions
 engine plates		  Forum Locked
 Printer Friendly
Author Previous Topic Topic Next Topic  

willys
Non Member

Netherlands
77 Posts
Posted - 04 Jul 2010 :  22:45:08  Show Profile
i`m looking for drawings of the front and back engine plates for a 400ci (Dodge engine)for my 200"FED Dave tuttle chassis or a site where i can find them

willys
Non Member

Netherlands
77 Posts
Posted - 06 Jul 2010 :  21:05:38  Show Profile
nobody???
Go to Top of Page

souped
Non Member

United Kingdom
17 Posts
Posted - 07 Jul 2010 :  11:10:09  Show Profile
Is the 400 the same block as the 440? As i am going to put a 440 in my fed and any help with motor plates would also be helpfull for me.
Go to Top of Page

willys
Non Member

Netherlands
77 Posts
Posted - 07 Jul 2010 :  13:50:11  Show Profile
Yes it`s the same
Go to Top of Page

teamtwisted
WB Member

516 Posts
Posted - 07 Jul 2010 :  18:30:32  Show Profile  Visit teamtwisted's Homepage
If you can't find something pre-made then I think you will have to search the web for the dimensions of the transmission/bellhousing mounting points and bolt circles and then draw something up from there.

Hope that helps,

Dean.

www.teamtwisted.co.uk
www.belle-designs.co.uk
Go to Top of Page

willys
Non Member

Netherlands
77 Posts
Posted - 12 Jul 2010 :  20:14:56  Show Profile
i`v been using normal ones and let them laser cut on the dimensions of the chassis,i made a mal of carton and it works
Go to Top of Page
  Previous Topic Topic Next Topic  
 Forum Locked
 Printer Friendly
Jump To:
The Wild Bunch Forum Archive © The Wild Bunch Nostalgia Drag Racing Club Go To Top Of Page
Powered By: Snitz Forums 2000 Version 3.4.07